Advertisement
Quick Links
Advertisement
Related Manuals for Digitus USB 2.0 External Enclosure 2.5" (6,35cm)
Summary of Contents for Digitus USB 2.0 External Enclosure 2.5" (6,35cm)
- Page 1 USB 2.0 External Enclosure 2.5" (6,35cm) User Manual DA-71001 • DA-71002...
-
Page 2: System Requirement
Foreword Congratulations of your purchase of our product! We will show you a new storage concept with safety and convenience. It is our pleasure to give you the best solution to expand your HDD`s capacity and enhance your data`s reliability in PC system or Mac system. Before using the product, please read this manual carefully for further recognizing of the product. -
Page 3: Hardware Install
IV. Hardware Install Slide the switch button to [OPEN] position Slide the top cover to the direction of USB socket Remove the top cover Connect the IDE HDD to the 44pin IDE connector (DA-71001); or SATA HDD to SATA connector (DA-71002) correctly and firmly. Put the top cover back to the main case, and slide toward switch button Slide the switch button to the [CLOSE] position... -
Page 4: Driver Installation
V. Driver Installation a. Under Windows 7/8/Vista/XP/2000: no need driver Under system Windows 7/8/Vista/XP/2000, system will automatically detect the new hardware and finish the setup! Then an icon will appear on the right-bottom area of the system toolbar as below: Congratulations to enjoy this product now! b. - Page 5 VII. Remove the external enclosure Before removing this unit from your computer, please finish the following procedures for a safe removal: 1). Click the icon in the [Desktop] window of your computer 2). A [Safely Remove Hardware] message window will appear, click the [Stop] button 3).