Related Manuals for Digitus USB 2.0, 4+1 Port PCI Add-On card
Summary of Contents for Digitus USB 2.0, 4+1 Port PCI Add-On card
- Page 1 USB 2.0, 4+1 Port PCI Add-On card User Manual (DS-33222) All brand names and trademarks are properties of their Respective owners.
-
Page 2: Features And Benefits
Features and Benefits VIA VT6212 chipset PCI 32-bit 33MHz Interface Compliant with USB specification revision 2.0 Backward compatible with USB 1.1 Specification Hot-swapping feature allows you to connect/disconnect devices without first turning system off Supports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.1 devices... -
Page 3: System Requirements
System Requirements Windows® 7, Vista, XP Available PCI slot Hardware Description Before installing the PCI VIA USB 2.0 Card, please see the photo below highlighting the available USB ports of the card. Note: The Internal Port (UJ5) shares with first External Port (UJ1). -
Page 4: Hardware Installation
Hardware Installation Turn Off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCI slot. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. -
Page 5: To Verify Driver Installation
For Windows® Server 2003/Vista Windows® Server 2003/Vista has built-in driver support for this controller. Just install the board and Windows will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Driver Installation Right click My Computer, then click Manage. Click Device Manager.