Selecting Main Or Sub Channel-Dual Mono; Setting The Digital Input Terminals - JVC RX-8030VBK Instructions Manual

7 Low frequency effect attenuator—LFE ATTENUATE
If the bass sound is distorted while playing back software
encoded with Dolby Digital or DTS, set the LFE level to
eliminate distortion.
Select one of the following:
0dB: Normally select this.
−10dB: Select when the bass sound is distorted.
Selecting main or sub channel—DUAL MONO
When the playback source is Dual Mono, you can select which,
or both channels to listen to.
Select the playback sounds (channel).
MAIN: Select to play back the main channel (Ch1).*
Signal indicator "L" lights up while playing back this
channel.
SUB: Select to play back the sub-channel (Ch2).*
Signal indicator "R" lights up while playing back this
channel.
ALL: Select to play back both the main and sub-channels
(Ch1/Ch2).*
Signal indicators "L" and "R" light up while playing
back these channels.
Notes:
• The Dual Mono format is not identical with bilingual
broadcasting for TV programs. So this setting does not take
effect while watching such bilingual programs.
* Dual Mono signals can be heard from the following speakers—
L (left front speaker), R (right front speaker), and C (center
speaker)—with respect to the current Surround setting.
Without Surround
Dual Mono
Setting
L R L
MAIN Ch 1 Ch 1 —
SUB Ch 2 Ch 2 —
ALL Ch 1 Ch 2 — Ch 1+Ch 2 — Ch 1+Ch 2 Ch 1+Ch 2
With Surround Activated
Center speaker setting
SMALL/LARGE NONE
C R L R
Ch 1 — Ch 1 Ch 1
Ch 2 — Ch 2 Ch 2

Setting the Digital Input Terminals

When you use the digital input terminals, register which components
you have connected to the digital input terminals.
7 Digital coaxial terminal—DGTL IN COAX
Set the component connected to the digital coaxial terminal
(DIGITAL IN 1):
DVD (initial setting), MD*, CDR, TV (or DBS**) or CD.
* When connecting an MD recorder to the digital input terminal,
change the source name to "MD" from "TAPE" (see page 19).
** If you have changed the source name from "TV" to "DBS,"
"DBS" appears (see page 19).
7 Digital optical terminals—DGTL IN OPTICAL
Set the components connected to the digital optical terminals
(DIGITAL IN 2 – 4).
• As you rotate MULTI JOG, the digital optical input terminals
are set to used for following digital components:
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "DVD"
2: CD 3: TV (or DBS** ) 4: CDR
2: CD 3: TV (or DBS**)
2: CD 3: MD*
2: MD* 3: TV (or DBS** ) 4: CDR
(back to the beginning)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CD"
2: DVD 3: TV (or DBS**)
2: DVD 3: TV (or DBS**)
2: DVD 3: MD*
2: MD* 3: TV (or DBS**)
(back to the beginning)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "TV" or
"DBS"**
2: CD 3: DVD
2: CD 3: DVD
2: CD 3: MD*
2: MD* 3: DVD
(back to the beginning)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "CDR"
2: CD 3: TV (or DBS**)
2: CD 3: TV (or DBS**)
2: CD 3: MD*
2: MD* 3: TV (or DBS**)
(back to the beginning)
When "DIGITAL IN 1 (DGTL IN COAX)" is set to "MD"*
2: CD 3: TV (or DBS**)
2: CD 3: TV (or DBS**)
2: CD 3: DVD
2: DVD 3: TV (or DBS**)
(back to the beginning)
* When connecting an MD recorder to the digital input terminal,
change the source name to "MD" from "TAPE" (see page 19).
** If you have changed the source name from "TV" to "DBS,"
"DBS" appears (see page 19).
"
"
4: MD*
"
4: CDR
"
"
4: CDR
"
4: MD*
"
4: CDR
"
4: CDR
"
4: CDR
"
4: MD*
"
4: CDR
"
4: CDR
"
4: DVD
"
4: MD*
"
4: DVD
"
4: DVD
"
4: CDR
"
4: DVD
"
4: CDR
"
4: CDR
27