Cleaning Pump Filter; General Cleaning - Defy Automaid 600 Owner's Manual

Cleaning the pump filter
A filter prevents foreign objects from entering and dam-
aging the pump. This filter should be cleaned after every
30-40 washes. First disconnect the machine from the
power supply. Use a large screwdriver or coin to turn the
plastic fasteners in the kick panel through 90°. Place a
shallow container below the filter outlet to collect any
spillage. Remove the filter by turning it in a counter
clockwise direction. Rinse the filter under running water.
Re-fit and secure the filter and kick panel.
If the filter cap is not fitted properly, water will leak from
the machine.

General Cleaning

On no account use benzene or other solvents to clean
the cabinet, door or rubber of the machine.
A damp cloth will normally suffice.
If desired, a good wax polish may be used on the
metal parts of the cabinet.
International fabric care labels
Recommended
washing
temperature
Do not use
bleach
Do not wash in
centrifugal
machine
Line dry
Ironing is per-
mitted
Care and maintenance
Bleach can
be used
May be
washed in
centrifugal
machine
Wash by
hand only
Do not wash
Use a warm,
Not hot iron
Page 10
No dry
cleaning
No spin
Dry on
horizontal
surface
Dry clean
Do not iron