Do you have a question about the 600 and is the answer not in the manual?
Questions and answers
Andries
April 9, 2025
Defy auto dry 600 does not switch on after a power failure
2 comments:
Andries
April 9, 2025
Defy auto dry 600 does not switch on, after a power failure.
Mr. Anderson
April 10, 2025
The Defy Automaid 600 may not switch on after a power failure if the control panel lock has been activated. Additionally, after a power interruption, the user may need to press the ‘Start/Pause/Cancel’ button to resume operation. If the fault persists, unplug the machine, wait a few minutes, and try again.
This answer is automatically generated
Andries
April 9, 2025
Defy auto dry 600 does not switch on.
1 comments:
Mr. Anderson
April 10, 2025
The Defy Autodry 600 may not switch on if the power cord is not plugged in or if the wall socket switch is off.
This answer is automatically generated
Lynette
March 23, 2025
How do I use the programmer /function knob
1 comments:
Mr. Anderson
March 23, 2025
Turn the programme selector knob in either direction to select the required programme. Always choose a programme suitable for the fabric type and follow garment care labels. With practice, you will determine which programme best suits your needs.
Page 1
You can rely on Defy Autodry 600 Premium www.defy.co.za OWNER’S MANUAL PAGE INDEX Introduction Installation • Unpacking • Damage • Location • Levelling • Venting exhaust air Advice column • Precautions • Unsuitable materials • Loading • Recommended programmes •...
Page 2
Introduction You are now the proud owner of one of the finest and most modern tumble dryers that today’s tech- nology can produce. Please read all the instructions carefully as they contain information on how to operate and care for your dryer so that you may gain the maximum benefit from it.
Page 3
Advice column Precautions • Do not allow children or the infirm to operate the dryer without supervision. • Pets and children have been known to climb into tumble dryers. Please check the drum be- fore use. The following items must NOT be placed in the Dryer as they pose a fire risk: •...
Page 4
Control panel Autodry Premium PROGRAMME PROGRESS INDICATOR Using the dryer Start • Sort the laundry according to fabric type. • Place the laundry in the drum. • Close the door. • Switch on by pressing the On / Off button. •...
Page 5
Features Programmes • There are: • Timed programmes of 60, 40. 20 and 10 minutes) • Two synthetic programmes (Ready to iron and Ready to wear) • Three cotton programmes (Extra dry, Ready to wear and Ready to iron) • A Delicates programme •...
Page 6
Trouble shooting Since the following are not factory faults, they are the owner’s responsibility. • Damage to exterior finish. • Breakage of components • Damage through improper use or installation of the dryer. • Damage caused by moving the dryer. Problem –Check The dryer or a programme will not start.
Page 7
Technical specifications Drying method Height Width Depth Height adjustment of feet Weight, unpacked Service Centres If you have followed the instructions and still have a problem, contact the nearest Defy Service Centre. They will be able to advise you on BLOEMFONTEIN 160 Long Street, Hilton, Bloemfontein 9301.
Page 8
Warranty This certificate is issued by DEFY APPLIANCES LIMITED manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
Need help?
Do you have a question about the 600 and is the answer not in the manual?
Questions and answers
Defy auto dry 600 does not switch on after a power failure
Defy auto dry 600 does not switch on, after a power failure.
The Defy Automaid 600 may not switch on after a power failure if the control panel lock has been activated. Additionally, after a power interruption, the user may need to press the ‘Start/Pause/Cancel’ button to resume operation. If the fault persists, unplug the machine, wait a few minutes, and try again.
This answer is automatically generated
Defy auto dry 600 does not switch on.
The Defy Autodry 600 may not switch on if the power cord is not plugged in or if the wall socket switch is off.
This answer is automatically generated
How do I use the programmer /function knob
Turn the programme selector knob in either direction to select the required programme. Always choose a programme suitable for the fabric type and follow garment care labels. With practice, you will determine which programme best suits your needs.
This answer is automatically generated