Frequency Measurement - TECPEL DCM-033 Operating Manual

E. Frequency Measurement (see figure 7)
Warning
To avoid harms to you or damages to the Meter
from eletric shock, do not attempt to measure
voltages higher than 600V AC/DC, although
readings may be obtained.
The resistance ranges are:
10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz and
10MHz.
To measure frequency, connect the Meter as follows:
1. Insert the red temperature probe into the Hz
Duty% terminal and the black temperature
probe into the COM terminal.
2. Set the rotary switch to Hz.
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
26
Red Black
(figure 7)