Measuring Resistance - TECPEL DCM-033 Operating Manual

B. Measuring Resistance (see figure 4)
Warning
To avoid damages to the Meter or to the devices
under test, disconnect circuit power and discharge
all the high-voltage capacitors before measuring
resistance.
The resistance ranges are:
400 , 4k , 40k ,400k ,M
To measure resistance, connect the Meter as follows:
1. Insert the red test lead into the Hz Duty%
terminal and the black test lead into the
COM terminal.
2.
Set the rotary switch to . Resistance measurement is default to auto range mode,
press REL to switch to manual ranging measurement mode.
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
and 40M .
20
Red Black
(figure 4)