Measurement Operation; Dc Voltage Measurement - TECPEL DMM135 Operating Manual

A. DC Voltage Measurement (see figure 3)
Warning
To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 500V although
readings may be obtained.
The DC Voltage ranges are : 400.0mV, 4.000V,
40.00V, 400.0V and 500V
1. Insert the red test lead into the VWmA terminal
and the black test lead into the COM terminal.
2. Set the rotary switch to V
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model DMM135: OPERATING MANUAL

Measurement Operation (1)

range.
14
black red
(figure 3)