Resistance Measurement - TECPEL DMM135 Operating Manual

Model DMM135: OPERATING MANUAL
Measurement Operation (8)
E. Resistance Measurement (see figure 5)
Warning
To avoid damages to the Meter or to the devices
under test, disconnect circuit power and discharge
all the high-voltage capacitors before measuring
resistance.
The Ω ranges are : 400.0Ω, 4.000kΩ, 40.00kΩ,
400.0kΩ, 4.000MΩ, and 40.00MΩ,
1. Insert the red test lead into the VΩmA terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to the Ω range.
3. Connect the test leads across with the object being
measured. The measured value shows on the display.
21
black red
(figure 5)