Shelf Positions - GE JTP13 Use And Care Manual

en Shelves
The shelves are designed with stop-locks so when
stop before coming completely out of the oven, and
will not tilt when you are removing food from them
or placing food on them.
When placing cookware on a shelf, pull the shelf out
to the bump on the shelf support. Place the cookware
on the shelf, then slide the shelf back into the oven.
This will eliminate reaching into the hot oven.
To remove a shelf from the oven, pull it toward
you, tilt the front end upward and pull the shelf out.
Be sure the shelf is cool before touching it.
To replace, place the shelf on the shelf support with
the stop-locks (curved extension of shelfl facing up
push the shelf toward the back of the oven until it
goes past the bump on the shelf support. Then lower
the front of the shelf and push it all the way back.

Shelf Positions

The oven has six shelf supports identified in this
Baking, Roasting and Broiling sections.
NOTE: The highest position (above F) is only
a support. It is not intended to be used as a shelf
position in these models that do not have the
convection feature.
9