Gold's Gym TRAINER 1190 User Manual page 8

3. With the help of a second person, hold the right
Upright (77) near the Base (83) as shown.
See the inset drawing. Tie the wire tie in the
right Upright (77) securely around the end of the
Upright Wire (76). Then, pull the other end of
the wire tie until the Upright Wire is routed com-
pletely through the right Upright.
4. Orient the right Upright (77) with the bend in the
plate positioned as shown.
Attach the right Upright (77) to the Base (83)
with a 3/8" x 2 3/4" Bolt (7), a 3/8" x 1" Patch
Bolt (8), and two 3/8" Star Washers (11); do not
fully tighten the Bolts yet. Be careful not to
pinch the Upright Wire (76).
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (51) so the treadmill is more stable. Do
not fully fold the Frame until the treadmill is
completely assembled.
Orient the left Upright (77) with the bend in the
plate positioned as shown.
Attach the left Upright (77) to the Base (83) with
a 3/8" x 2 3/4" Bolt (7), a 3/8" x 1" Patch Bolt (8),
and two 3/8" Star Washers (11); do not fully
tighten the Bolts yet.
Attach a Wheel (91) to an Extension Leg (88)
with a 3/8" x 2 3/4" Bolt (7) and a 3/8" Nut (12).
Do not overtighten the Nut; the Wheel must
turn freely.
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
3
76
Wire
Tie
77
76
Wire Tie
4
Plate
5
77
11
83
7
8
8
77
83
77
76
83
11
7
8
Plate
7
88
91
12
51