Gold's Gym TRAINER 1190 User Manual page 11

11. With the help of a second person, hold the con-
sole assembly near the Uprights (77).
Connect the Upright Wire (76) to the console
wire extending from the console assembly. See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (76).
Insert the excess wire into the right Upright (77)
as you set the console assembly on the
Uprights. Be careful not to pinch any wires.
12. Attach the console assembly to the Uprights
(77) with four 3/8" x 1 1/4" Patch Bolts (9) and
four 3/8" Star Washers (11). Start all four
Patch Bolts before tightening any of them.
11
77
Console
Wire
76
12
Console
Assembly
11
11
9
77
11
Console
Assembly
Console
Wire
Tie
9
11
9
Wire
76
77
11
9
77