Repeater Mode - D-Link DAP-1650 User Manual

Section 3 - Configuration
Repeater mode re-broadcasts the wireless signal of an existing network to increase coverage. The existing wireless signal can
be repeated by the DAP-1650 using both the 2.4 GHz and 5 GHz bands.
Wireless Mode:
Select Repeater from the drop-down menu.
Enable Wireless: Check the box to enable the wireless function for the 2.4 GHz
band. If you do not want to use wireless, uncheck the box to
disable all wireless functions. You may also set up a specific
time range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule. By default,
the schedule is set to Always.
Wireless Network Specify a network name (SSID) to identify the 5 GHz network.
Name:
This is the network name that wireless clients will search for
when connecting to your wireless network. This name should
be different to that of the 2.4 GHz network configured above.
802.11 Mode:
Select one of the following:
802.11a Only - Select if you are only using 802.11a wireless
clients.
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11a - Select if you are using a mix of
802.11n and 802.11a wireless clients.
802.11ac Only - Select if you are only using 802.11ac wireless
clients.
Mixed 802.11ac and 802.11n - Select if you are using a mix of
802.11ac and 802.11n wireless clients.
Mixed 802.11ac, 802.11n and 802.11a - Select if you are using
a mix of 802.11ac, 802.11n, and 802.11a wireless clients.
Enable Auto The Auto Channel Scan setting can be selected to allow the
Channel Scan:
DAP-1650 to automatically choose the channel with the least
amount of interference.
D-Link DAP-1650 User Manual

Repeater Mode

2.4 GHz Band
31