Access Point Mode - D-Link DAP-1650 User Manual

Section 3 - Configuration
Wireless Mode: Select Access Point from the drop-down menu.
Enable Wireless: Check the box to enable the wireless function for the 2.4 GHz
band. If you do not want to use wireless, uncheck the box to
disable all wireless functions. You may also set up a specific
time range (schedule). Select a schedule from the drop-down
menu or click Add New to create a new schedule. By default,
the schedule is set to Always.
Wireless
Specify a network name (SSID) to identify the 2.4 GHz network.
Network Name:
This is the network name that wireless clients will search for
when connecting to your wireless network.
802.11 Mode:
Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Enable Auto The Auto Channel Scan setting can be selected to allow the
Channel Scan:
DAP-1650 to automatically choose the channel with the least
amount of interference.
Wireless
Indicates the channel setting for the DAP-1650. The channel
Channel:
can be changed to fit the channel setting for an existing wireless
network or to reduce interference in congested areas. If you
enable Auto Channel Scan, this option will not be available.
Transmission
Use the drop-down menu to select the appropriate transmission
Rate:
rate in Mbits per second. Many users will want to use the default
setting, Best (automatic).
D-Link DAP-1650 User Manual

Access Point Mode

2.4 GHz Band
27