D-Link DAP-1650 User Manual

D-Link DAP-1650 User Manual

Wireless ac1200 dual-band gigabit range extender
Hide thumbs Also See for DAP-1650:

Advertisement

Table of Contents
Version 1.01 | 12/09/2013

User Manual

DAP-1650 Wireless AC1200 Dual-band Gigabit Range Extender
DAP-1650

Advertisement

Table of Contents
loading

  Related Manuals for D-Link DAP-1650

  Summary of Contents for D-Link DAP-1650

  • Page 1: User Manual

    Version 1.01 | 12/09/2013 User Manual DAP-1650 Wireless AC1200 Dual-band Gigabit Range Extender DAP-1650...
  • Page 2: Table Of Contents

    Access Point Mode .............19 Admin.................56 Repeater Mode ..............22 System ................57 Media Bridge Mode ............24 Firmware ................58 Manual Configuration ...............26 Time ..................59 Wireless Settings ..............26 System Check ..............60 Access Point Mode ............27 Schedules .................61 Repeater Mode ...............31 D-Link DAP-1650 User Manual...
  • Page 3 Logs ..................71 Networking Basics ............94 Statistics .................72 Check your IP address ...............94 Wireless ..................73 Statically Assign an IP address ..........95 IPv6 ..................74 Help ....................75 Technical Specifications ..........96 Wireless Security .............76 Compliance Statements ..........98 What is WEP? ................76 D-Link DAP-1650 User Manual...
  • Page 4: Product Overview

    Wi-Fi Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DAP-1650 will cause damage and void the warranty for this product.
  • Page 5: System Requirements

    • Mozilla Firefox 12.0 or higher • Google™ Chrome 20.0 or higher • Apple Safari 4.0 or higher Windows Users: Make sure you have the latest version of Java installed. ® Visit www.java.com to download the latest version. D-Link DAP-1650 User Manual...
  • Page 6: Introduction

    Environmental factors will adversely affect wireless signal range. Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.
  • Page 7: Features

    Environmental factors will adversely affect wireless signal range. Wireless range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.
  • Page 8: Hardware Overview

    Power Switch Press to turn power to the unit on or off. Power Receptor Receptor for the supplied power adapter. Reset Button (base) Press the reset button to return the device back to it’s factory conditions. D-Link DAP-1650 User Manual...
  • Page 9: Leds

    WPS process. The light will blink orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the connection Internet LED is good but the access point cannot connect to the Internet. D-Link DAP-1650 User Manual...
  • Page 10: Installation

    Section 2 - Installation Installation Please configure the DAP-1650 with a computer connected directly to the device. The following pages will explain the different operational modes you can use. Operation Modes The DAP-1650 features three operation modes, enabling you to customize it to your networking requirements. Please refer to the following sections to determine which mode is most suitable for your network.
  • Page 11: Access Point Mode

    Section 2 - Installation Access Point Mode Access Point (AP) mode adds wireless capability to your existing wired network. The DAP-1650 acts as a central connection point for any computer (client) that has an 802.11ac or backwards compatible 802.11n/g/b/a wireless network interface and is within range of the access point.
  • Page 12: Repeater Mode

    In Repeater mode, the DAP-1650 extends the range of your existing wireless network by repeating the wireless signal of another access point or wireless router. The DAP-1650 and wireless router (if used) must be within range of each other. The extended wireless network can use the same SSID and security settings as the existing network, or you can choose to specify a new network name and security method.
  • Page 13: Media Bridge Mode

    Media Bridge Mode In Media Bridge mode, the DAP-1650 creates a wireless link between two existing networks, and enables you to attach a wired device to a wireless network.The two networks must be within wireless reach of one another in order for bridge mode to be effective.
  • Page 14: Wireless Installation Considerations

    • Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
  • Page 15: Configuration

    Setup > Storage page (refer to page 22) for this app to work properly. 1. Plug your USB storage drive into the USB port. USB port Note: The DAP-1650 supports hard drives with up to one terabyte of storage capacity. 2. Use your iOS or Android mobile device to scan the QR code to the right to download the SharePort Mobile app.
  • Page 16: Qrs Mobile App Setup

    Section 2 - Installation QRS Mobile App Setup The DAP-1650 can be set up from your iOS or Android smartphone or tablet device using the QRS Mobile app. Search for “QRS Mobile” in the App Store or Google Play, or use...
  • Page 17: Web-Based Configuration Utility

    Section 3 - Configuration Web-based Configuration Utility This section will show you how to configure your D-Link wireless access point using the web-based configuration utility. If you wish to change the default settings or adjust the configuration of the DAP-1650, you may use the web-based configuration utility.
  • Page 18: Wireless Setup Wizard

    Wireless Setup Wizard Click Launch Wireless Setup Wizard to configure your access point. If you want to configure the access point manually without running the wizard, skip to ”Manual Configuration” on page 26. Click Next to continue. D-Link DAP-1650 User Manual...
  • Page 19: Access Point Mode

    Section 3 - Configuration Access Point Mode This wizard is designed to assist you in configuring your DAP-1650 as an access point. Select Access Point from the drop-down menu. Then, click Next to continue. This screen will help you to set a network name (SSID) and security password for your wireless network.
  • Page 20 Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. Select your time zone from the drop-down menu and click Next to continue. D-Link DAP-1650 User Manual...
  • Page 21 Click Cancel to continue without saving a bookmark. In order for your network settings to take effect the AP will reboot automatically. When the device has finished rebooting the main screen will display. D-Link DAP-1650 User Manual...
  • Page 22: Repeater Mode

    Section 3 - Configuration Repeater Mode This wizard is designed to assist you in configuring your DAP-1650 as a repeater to extend the range of your existing wireless network. Select Repeater from the drop-down menu. This screen will help you to set a network name (SSID) and security password for your wireless network.
  • Page 23 Click Finish to save your network settings. In order for your network settings to take effect the AP will reboot automatically. When the device has finished rebooting the main screen will display. D-Link DAP-1650 User Manual...
  • Page 24: Media Bridge Mode

    Media Bridge Mode This wizard is designed to assist you in configuring your DAP-1650 as a media bridge to extend the range of your existing wireless network. This mode is particularly useful for attaching a wired device to a wireless network.
  • Page 25 Click Finish to save your network settings. In order for your network settings to take effect the AP will reboot automatically. When the device has finished rebooting the main screen will display. D-Link DAP-1650 User Manual...
  • Page 26: Manual Configuration

    Manual Configuration Wireless Settings You may also manually configure your DAP-1650 instead of running the setup wizard. Please refer to the following pages for detailed instructions on how to manually configure the DAP-1650 for your desired operation mode. Access Point mode - page 27...
  • Page 27: Access Point Mode

    802.11n, 802.11g, and 802.11b wireless clients. Enable Auto The Auto Channel Scan setting can be selected to allow the Channel Scan: DAP-1650 to automatically choose the channel with the least amount of interference. Wireless Indicates the channel setting for the DAP-1650. The channel...
  • Page 28 Select whether you would like the network name (SSID) of your wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the DAP-1650 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wireless network in order to connect to it.
  • Page 29 802.11ac, 802.11n, and 802.11a wireless clients. Enable Auto The Auto Channel Scan setting can be selected to allow the Channel Scan: DAP-1650 to automatically choose the channel with the least amount of interference. Wireless Indicates the channel setting for the DAP-1650. The channel...
  • Page 30 Status: wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the DAP-1650 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wireless network in order to connect to it.
  • Page 31: Repeater Mode

    Section 3 - Configuration Repeater Mode Repeater mode re-broadcasts the wireless signal of an existing network to increase coverage. The existing wireless signal can be repeated by the DAP-1650 using both the 2.4 GHz and 5 GHz bands. 2.4 GHz Band Wireless Mode: Select Repeater from the drop-down menu.
  • Page 32 Status: wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the DAP-1650 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wireless network in order to connect to it.
  • Page 33 802.11ac, 802.11n, and 802.11a wireless clients. Enable Auto The Auto Channel Scan setting can be selected to allow the Channel Scan: DAP-1650 to automatically choose the channel with the least amount of interference. Wireless Indicates the channel setting for the DAP-1650. The channel...
  • Page 34 Status: wireless network to be Visible or Invisible to wireless clients. If Invisible, the SSID of the DAP-1650 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID of your wireless network in order to connect to it.
  • Page 35: Media Bridge Mode

    Click Save Settings at the bottom of the page to save the current configuration. Note: The Bridge mode is not completely specified in the Wi-Fi or IEEE standards. This mode will work with other DAP-1650 units. Communication with other APs (even other D-Link APs) is not guaranteed.
  • Page 36: Configuring Wireless Security

    Section 3 - Configuration Configuring Wireless Security Wireless security encryption prevents unauthorized users from accessing your wireless network. The DAP-1650 features two methods of wireless security encryption: Wired Equivalent Privacy (WEP), and Wi-Fi Protected Access (WPA). It is recommended that you use WPA security if your wireless devices support this standard, as it is more secure than the older WEP standard. For more details of wireless security standards, please refer to “Wireless Security”...
  • Page 37 Select WPA-Personal from the drop-down menu. WPA Mode: There are two versions of WPA supported by the DAP-1650: WPA and WPA2. It is recommended that you use Auto(WPA or WPA2) so that the WPA2 version will be used if connecting wireless clients support it.
  • Page 38 Enter the port for the backup RADIUS authentication server. Shared Key: Second Radius Enter the shared secret required by the backup RADIUS Server Shared authentication server. Secret: Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 39: Network Settings

    (Static IP only). Secondary DNS Enter the secondary DNS server address to be used by the access Server: point (Static IP only). Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 40 Enter the primary IPv6 DNS server address for your network. Server: Secondary DNS Enter the secondary IPv6 DNS server address for your network. Server: Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 41 Enter the primary IPv6 DNS server address to be used. Server: Secondary DNS Enter the secondary IPv6 DNS server address to be used. Server: Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 42: Storage

    Verify Password: In the Verify Password field, the user can re-enter the password that will be associated with the user account. Click the Add/Edit button the add a new user account or modify an existing account. D-Link DAP-1650 User Manual...
  • Page 43 Click the Append button to add a blank account with the access path and permission specified. Click the OK button to accept the changes made for the existing account. Click the Cancel button to discard the changes made. D-Link DAP-1650 User Manual...
  • Page 44 WAN IP address will be used. If, however, a DDNS account is specified, then the domain name will be used. Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DAP-1650 User Manual...
  • Page 45: Media Server

    Select whether to enable or disable the iTunes Server functions. Folder: Choose the location of the iTunes Library folder you wish to share or check the box to use the root folder if it is located on the root folder of the connected drive. D-Link DAP-1650 User Manual...
  • Page 46: Advanced

    Section 3 - Configuration Advanced This section allows you to configure the advanced parameters of your DAP-1650. There will be different advanced features available for configuration based on the mode in which your device is operating. The instructions below are listed according to operation mode.
  • Page 47: Advanced Wireless

    Enabling this option allows the access point to listen for internet group management protocol (IGMP) traffic, which can help to detect clients which require multicast streams. Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 48: Guest Zone

    Security Mode: Refer to “Wireless Security” on page lxxvi for more information regarding wireless security. WLAN Partition: Tick the check box to prevent the guest clients from accessing other guests in the guest zone. D-Link DAP-1650 User Manual...
  • Page 49: Qos

    QoS panel will appear below. Lan Port 1-4: Select the port and the type of traffic you wish to prioitize on that port. Advanced QOS: Use this panel to fine-tune your network traffic prioritzation by protocol. D-Link DAP-1650 User Manual...
  • Page 50: Wi-Fi Protected Setup

    Section 3 - Configuration Wi-Fi Protected Setup This section allows you to configure how the DAP-1650 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection. Enable: Check the box to enable WPS. Lock WPS-PIN Check the box to disable WPS using the PIN method. If this...
  • Page 51: User Limit

    Here, you can set a maximum number of users that can be connected to the access point at any one time for each wireless band. Enable User Check the box to enable the user limit function. Limit: User Limit: Enter a number of users (between 1-32). Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 52: Repeater Mode

    Click Save Settings at the bottom of the page to save the current configuration. 5 GHz Band Transmit Power: Select the desired transmission power of the wireless radio from the drop-down menu. Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 53: Wi-Fi Protected Setup

    Section 3 - Configuration Wi-Fi Protected Setup This section allows you to configure how the DAP-1650 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection. Enable: Check the box to enable WPS. Lock WPS-PIN Check the box to disable WPS using the PIN method. If this...
  • Page 54: Media Bridge Mode

    Click Save Settings at the bottom of the page to save the current configuration. 5 GHz Band Transmit Power: Select the desired transmission power of the wireless radio from the drop-down menu. Click Save Settings at the bottom of the page to save the current configuration. D-Link DAP-1650 User Manual...
  • Page 55: Wi-Fi Protected Setup

    Section 3 - Configuration Wi-Fi Protected Setup This section allows you to configure how the DAP-1650 uses Wi-Fi Protected Setup (WPS) to create a secure wireless connection. Enable: Check the box to enable WPS. Lock WPS-PIN Check the box to disable WPS using the PIN method. If this...
  • Page 56: Maintenance

    Re-enter the new password in this field. Password: Gateway Name: This allows you create a user friendly name for your device. Enable Click Save Settings at the bottom of the page to save the Graphical current configuration. Authentication: D-Link DAP-1650 User Manual...
  • Page 57: System

    Upload Settings to apply the configuration in the file to the access point. Note: This will overwrite any current configuration. Restore to Click Restore Device to reset the DAP-1650’s settings to the Factory Default factory defaults. Settings: Warning: This will erase all current settings and cannot be undone.
  • Page 58: Firmware

    Warning: You must use a wired connection to the access point to update the firmware. Language Pack Click Browse to locate a language pack file on your computer. Upgrade: Once located, click Upload to commence the language pack upgrade process. D-Link DAP-1650 User Manual...
  • Page 59: Time

    Enable NTP Check the box to have the access point automatically Server: synchronize its clock and calendar with D-Link’s Internet time server. NTP Server Used: Type the address of the NTP server you would like to use in the field provided, or choose a pre-determined server from the drop-down menu and click <<...
  • Page 60: System Check

    Enter the host name or IP address for which you wish to conduct Address: a ping test. Host Name Enter the host name or IPv6 address for which you wish to or IPv6 conduct a ping test. Address: Ping Displays results of the ping test above. Result: D-Link DAP-1650 User Manual...
  • Page 61: Schedules

    Schedule Rules This table displays a summary of all current schedule rules. Click List. on the Edit icon to edit the rule, or click on the Delete icon to delete the rule from the list. D-Link DAP-1650 User Manual...
  • Page 62: Repeater Mode

    Re-enter the new password in this field. Password: Gateway Name: This allows you create a user friendly name for your device. Enable Click Save Settings at the bottom of the page to save the Graphical current configuration. Authentication: D-Link DAP-1650 User Manual...
  • Page 63: System

    Upload Settings to apply the configuration in the file to the access point. Note: This will overwrite any current configuration. Restore to Click Restore Device to reset the DAP-1650’s settings to the Factory Default factory defaults. Settings: Warning: This will erase all current settings and cannot be undone.
  • Page 64: Firmware

    Warning: You must use a wired connection to the access point to update the firmware. Language Pack Click Browse to locate a language pack file on your computer. Upgrade: Once located, click Upload to commence the language pack upgrade process. D-Link DAP-1650 User Manual...
  • Page 65: Time

    Enable NTP Check the box to have the access point automatically Server: synchronize its clock and calendar with D-Link’s Internet time server. NTP Server Used: Type the address of the NTP server you would like to use in the field provided, or choose a pre-determined server from the drop-down menu and click <<...
  • Page 66: Media Bridge Mode

    Re-enter the new password in this field. Password: Gateway Name: This allows you create a user friendly name for your device. Enable Click Save Settings at the bottom of the page to save the Graphical current configuration. Authentication: D-Link DAP-1650 User Manual...
  • Page 67: System

    Upload Settings to apply the configuration in the file to the access point. Note: This will overwrite any current configuration. Restore to Click Restore Device to reset the DAP-1650’s settings to the Factory Default factory defaults. Settings: Warning: This will erase all current settings and cannot be undone.
  • Page 68: Firmware

    Warning: You must use a wired connection to the access point to update the firmware. Language Pack Click Browse to locate a language pack file on your computer. Upgrade: Once located, click Upload to commence the language pack upgrade process. D-Link DAP-1650 User Manual lxviii...
  • Page 69: Time

    Enable NTP Check the box to have the access point automatically Server: synchronize its clock and calendar with D-Link’s Internet time server. NTP Server Used: Type the address of the NTP server you would like to use in the field provided, or choose a pre-determined server from the drop-down menu and click <<...
  • Page 70: Status

    Section 3 - Configuration Status Device Info This page displays the current information for the DAP-1650, such as LAN and wireless LAN information and statistics. General: Displays the access point’s time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point.
  • Page 71: Logs

    Section 3 - Configuration Logs The DAP-1650 keeps a running log of events and activities occurring on the access point. If the device is rebooted, the logs will automatically be cleared. There are several types of logs that can be viewed: System...
  • Page 72: Statistics

    Statistics The DAP-1650 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted. Use the buttons at the top of the page to Refresh or Clear the statistics.
  • Page 73: Wireless

    The wireless section allows you to view the wireless clients that are connected to your wireless access point. Connected Time: Displays the amount of time the wireless client has been connected to the access point. MAC Address: The Ethernet ID (MAC address) of the wireless client. D-Link DAP-1650 User Manual lxxiii...
  • Page 74: Ipv6

    If configured this field will display the details of the primary IPv6 DNS server address to be used. Server: Secondary DNS If configured this field will display the details of the secondary IPv6 DNS server address to be used. Server: D-Link DAP-1650 User Manual lxxiv...
  • Page 75: Help

    Section 3 - Configuration Help D-Link DAP-1650 User Manual lxxv...
  • Page 76: Wireless Security

    This section will explain the different types of security you can use to protect your wireless network from intruders. Please note that some security methods may not be available for all operation modes. The DAP-1650 offers the following types of security: •...
  • Page 77: What Is Wpa

    • WPA/WPA2 - Enterprise is designed for medium-to-large scale networking environments and uses a centralized RADIUS server for authentication. Users must be registered and authorized by the RADIUS server in order to access the wireless network. D-Link DAP-1650 User Manual lxxvii...
  • Page 78: Connect To A Wireless Network

    To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DAP-1650 User Manual lxxviii...
  • Page 79 WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DAP-1650 User Manual lxxix...
  • Page 80: Windows ® 7

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DAP-1650 User Manual lxxx...
  • Page 81 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-1650 User Manual lxxxi...
  • Page 82 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1650 User Manual lxxxii...
  • Page 83: Windows Vista

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/ IP settings of your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1650 User Manual lxxxiii...
  • Page 84: Wpa/Wpa2

    1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DAP-1650 User Manual lxxxiv...
  • Page 85 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1650 User Manual lxxxv...
  • Page 86: Wps/Wcn 2.0

    Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DAP-1650 User Manual lxxxvi...
  • Page 87: Using Windows Xp

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/ IP settings of your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1650 User Manual lxxxvii...
  • Page 88: Configure Wpa-Psk

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1650 User Manual lxxxviii...
  • Page 89 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DAP-1650 User Manual lxxxix...
  • Page 90: Troubleshooting

    Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1650. Read the following descriptions if you are having problems. 1. Why can’t I access the web-based configuration utility? When entering the name or IP address of the D-Link access point (http://dlinkap.local for example), you are not connecting...
  • Page 91 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management.
  • Page 92 95, 98, and ME users type in command (Windows ® ® (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f ] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-1650 User Manual xcii...
  • Page 93 • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DAP-1650 User Manual xciii...
  • Page 94: Networking Basics

    If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DAP-1650 User Manual xciv...
  • Page 95: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-1650 User Manual...
  • Page 96: Technical Specifications

    • Multi-language web setup wizard • MAC address filter • Green Ethernet Mobile App Support • SharePort Mobile • QRS Mobile Wireless Security • WPA & WPA2 (Wi-Fi Protected Access) • Wi-Fi Protected Setup (WPS) PIN/PBC Physical D-Link DAP-1650 User Manual xcvi...
  • Page 97 All Maximum transmission power values expressed are for dual-chain mode. Maximum transmission power and included antennas may vary depending on regional regulations. Range may vary depending on regional regulations. D-Link DAP-1650 User Manual xcvii...
  • Page 98: Compliance Statements

    Appendix C - Compliance Statements Compliance Statements Trademarks: D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners. Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the...
  • Page 99: Industry Canada Statement

    (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. D-Link DAP-1650 User Manual xcix...
  • Page 100 Les types d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. TELEC Statement: 電波法により5GHz帯は屋内使用に限リます。 [以下警語適用台灣地區] 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合 法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 在5.25-5.35秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用 D-Link DAP-1650 User Manual...

Table of Contents