System - D-Link DAP-1650 User Manual

Section 3 - Configuration
The system page can be used to save and restore the device's configuration, as well as restore the factory default settings.
Save Settings to Click Save to save the access point's current configuration to
Local Hard Drive: a file on your local computer. After clicking, a Save File dialog
will appear, prompting you to save the configuration file on
your computer.
Load Settings Click Browse to locate a previously saved configuration file
From Local Hard
on your local computer. Once the file has been located, click
Drive: Upload Settings to apply the configuration in the file to the
access point.
Note: This will overwrite any current configuration.
Restore to Click Restore Device to reset the DAP-1650's settings to the
Factory Default
factory defaults.
Settings: Warning: This will erase all current settings and cannot be
undone.
Reboot the Click Reboot to reboot the device. You will need to log in to the
Device: device again once the reboot has been completed.
Remove
Click to remove a language pack from the device.
Language Pack:
D-Link DAP-1650 User Manual

System

lxvii