Time - D-Link DAP-1650 User Manual

Section 3 - Configuration
Use the time page to configure the time and date settings of the access point. You can also configure daylight saving adjustments
and synchronize the access point's clock and calendar with an internet-based network time protocol (NTP) server.

Time:

Displays the access point's current time and date.
Time Zone:
Select your time zone from the drop-down menu.
Enable Daylight
Check the box to have the access point automatically adjust the
Saving:
clock for daylight saving.
Daylight Saving
Select the offset for beginning daylight saving from the drop-
Offset:
down menu.
Daylight Saving Use the drop-down menus to set the Start and End dates for
Dates:
daylight saving time.
Enable NTP
Check the box to have the access point automatically
Server:
synchronize its clock and calendar with D-Link's Internet time
server.
NTP Server Used:
Type the address of the NTP server you would like to use in the
field provided, or choose a pre-determined server from the
drop-down menu and click << to populate the field.
Set the Time and
Use the drop-down menus to manually configure the time and
Date Manually: date. This option will not be available if Enable NTP Server is
selected above.
Click Save Settings at the bottom of the page to save the
current configuration.
D-Link DAP-1650 User Manual
Time
lxix