Advanced Operations For Internet Radio; Saving Internet Radio Stations; Retrieving Saved Internet Radio Stations; Setting Up The Network - Pioneer SC-LX81 Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for SC-LX81:
Table of Contents

Advertisement

Playback with HOME MEDIA GALLERY inputs
Photo files
Files of up to 12 M pixels can be played. Progressive JPEG
images are not supported.
Category
JPEG

Advanced operations for Internet radio

SOURCE
TV
RCV
CH
VOL
VOL
TV CONTROL
INPUT
MUTE
MUTE
AUDIO
VIDEO
PARAMETER
PARAMETER
TUNE +
EXIT
TOOLS
TOP MENU
TOP MENU
MENU
BAND
BAND
T.EDIT
ST
ST +
ENTER
ENTER
PTY
SEARCH
RETURN
HOME
MENU
TUNE
iPod CTRL
STATUS
PHASE CTRL
CH LEVEL

Saving Internet radio stations

This receiver can remember the Internet radio stations
that you often listen to in 3 classes (A, B, and C) with up
to 10 stations in each class to make the total of 30
stations at its maximum capacity.
Before proceeding with the following steps, check
whether you have followed Steps 2 to 4 on page 73.
1
Set the operation selector switch to SOURCE.
2
Tune into the Internet radio station that you want
to save.
Tune into the desired Internet radio station by following
Steps 2 to 4 on page 73.
3
Press T.EDIT to switch to the station-saving mode.
4
Press CLASS to select the class that you want to
save the station in.
Select the desired class from A, B, and C.
Use / to select the number that you want to
5
save the station as, and then press ENTER.
You can also select the station number by using the
number buttons. Select the desired number from 0 to 9.

Retrieving saved Internet radio stations

You need to save Internet radio stations first before
retrieving them. If there are no Internet radio stations
currently being saved, see Saving Internet radio stations
above and save at least one Internet radio station before
proceeding with the following steps.
Note
1 In case you make changes to the network configuration without the DHCP server function, make the corresponding changes to the network
settings of this receiver.
Extension
.jpg
.jpeg
EON
THX
MPX
MPX
AUTO/
STEREO/
STANDARD ADV SURR
DIRECT
A.L.C.
PGM
BD MENU
SIGNAL SEL SLEEP
DIMMER
AUDIO
SR+
SBch
MCACC
DISP
A.ATT
GENRE HDMI OUT
CH
D.ACCESS
D.ACCESS
CLASS
ENTER
CLR
1
Set the operation selector switch to SOURCE.
2
Select the class that you want to retrieve an
Internet radio station from.
Each time you press CLASS, the class switches to A, B,
and C in turn.
Use / to select the station number that you
3
want to retrieve.
You can also select the station number by using the
number buttons.
'Preset Not Stored' appears when you select an Internet
radio station currently not being saved.

Setting up the network

In case the router connected to the LAN terminal on this
receiver is a broadband router (with the built-in DHCP
server function), simply turn on the DHCP server
function, and you will not need to set up the network
manually. You must set up the network as described
below only when you have connected this receiver to a
server without the DHCP server function. Before you set
up the network, consult with your ISP or the network
manager for the required settings. It is advisory that you
also refer to the operation manual supplied with your
1
network component.
IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
In case an xDSL modem or a terminal adapter is directly
connected to this receiver, enter the subnet mask
provided by your ISP on paper. In most of the cases, enter
255.255.255.0.
Gateway IP
In case a gateway (router) is connected to this receiver,
enter the corresponding IP address.
DNS Server Preferred/DNS Server Alternate
In case there is only one DNS server address provided by
your ISP on paper, enter 'DNS Server Preferred'. In case
there are more than two DNS server addresses, enter
'DNS Server Alternate' in the other DNS server address
field.
10
81
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-lx71

Table of Contents