About Status Messages; Meaning Of Messages Displayed When The Hdmi Control Function Is Set To On - Pioneer SC-LX81 Operating Instructions Manual

15 Additional information
Symptoms
The Home Media Gallery
cannot be operated with
the buttons on the remote
control.

About status messages

Refer to the following information when you come up with a status message while operating the Home Media Gallery.
Status messages
Please Wait
Connecting...
Connection Down
File Format Error
Track Not Found
Server Error
Server Disconnected
USB Error 1
empty
Preset Not Stored
Network Problem
Out of Range
License Error
Item Already Exists
Favorite List Full

Meaning of messages displayed when the HDMI control function is set to ON

Message (error number) Problem
HDMI C ERR 110 to 190
HDMI C ERR 1A0
HDMI C ERR 1B0
HDMI C ERR 1C0
HDMI C ERR 2C0
118
En
Causes
The remote control is not currently set to the
Home Media Gallery mode.
Descriptions
A component on the network, including a PC, is currently being connected. Wait for a while.
The selected category or Internet radio station cannot be accessed.
Cannot be played back for some reasons.
The selected song has not been found anywhere on the network.
The selected server cannot be accessed.
The server has been disconnected.
The amount of electricity consumption for a USB memory device is too large.
There are no files stored in the selected folder.
The selected Internet radio station is not currently registered and saved.
There is a problem with the network settings. Check the network settings. The message also
appears then the network settings of this receiver have been changed. In this case, please
wait.
The value entered is beyond the permitted range of the network settings.
The license for the contents to be played back is invalid.
This is displayed when the file you have attempted to register in the Favorites folder has
already been registered.
This is displayed when you have attempted to register a file in the Favorites folder but the
Favorites folder is already full.
HDMI cable is not properly connected.
Remedies
Press HOME MEDIA GALLERY to set the
remote control to the Home Media Gallery
mode.
Remedy
• Check the connection.
• There may be a broken wire in the cable.
• This receiver or connected components may be
damaged.
Refer to
73