Home Media Gallery - Pioneer SC-LX81 Operating Instructions Manual

15 Additional information

HOME MEDIA GALLERY

Symptoms
Cannot access the
network.
Playback does not start
while 'Connecting...'
continues to be displayed.
The PC or Internet radio is
not properly operated.
The audio files stored on
components on the
network, such as a PC,
cannot be played back.
Cannot access the
component connected to
the network.
116
En
Causes
The LAN cable is not firmly connected.
The router is not switched on.
Internet security software is currently
installed in the connected component.
The audio component on the network which
has been switched off is switched on.
The component is currently disconnected
from this receiver or the power supply.
The corresponding IP address is not properly
set.
The IP address is being automatically
configured.
Windows Media Player 11 is not currently
installed on your PC.
Audio files were recorded in formats other
than MP3, WAV (LPCM only), MPEG-4 AAC,
FLAC, and WMA.
Audio files recorded in MPEG-4 AAC or FLAC
are being played back on Windows Media
Player 11 or Windows Media Connect.
The component connected to the network is
not properly operated.
The component connected to the network
does not permit file sharing.
The folder stored on the component
connected to the network has been deleted
or damaged.
The component connected to the network is
not properly set.
There are no playable audio files on the
component connected to the network.
Remedies
Firmly connect the LAN cable.
Switch on the router.
There are cases where a component with
Internet security software installed cannot be
accessed.
Switch on the audio component on the
network before switching on this receiver.
Check whether the component is properly
connected to this receiver or the power
supply.
Switch on the built-in DHCP server function
of your router, or set up the network manually
according to your network environment.
The automatic configuration process takes
time. Please wait.
Install Windows Media Player 11 on your PC.
Play back audio files recorded in MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC, or WMA.
Note that some audio files recorded in these
formats may not be played back on this
receiver.
Audio files recorded in MPEG-4 AAC or FLAC
cannot be played back on Windows Media
Player 11 or Windows Media Connect. Try
using another server.
Check whether the component is affected by
special circumstances or is in the sleep
mode.
Try rebooting the component if necessary.
Try changing the settings for the component
connected to the network.
Check the folder stored on the component
connected to the network.
If the client is automatically authorized, you
need to enter the corresponding information
again. Check whether the connection status
is set to "Do not authorize".
Check the audio files stored on the
component connected to the network.
Refer to
71
—
—
—
—
81
—
72
—
Refer to the
operation
manual
supplied
with your
server.
—
—
—
—
—