Connecting Antennas; Am Loop Antenna - Pioneer SC-LX81 Operating Instructions Manual

Connecting your equipment
The diagrams below show suggested surround and
surround back speaker orientation. The first diagram (fig.
A) shows orientation with one surround back speaker (or
none) connected. The second (fig. B) shows orientation
with two surround back speakers connected.
90° to 120°
LS RS
LS RS
SB
fig. A
Note
1 Do not use any antennas other than the supplied AM loop antenna.
LS RS
0° to 60°
SBL SBR
SBL SBR
fig. B

Connecting antennas

The supplied antennas provide a simple way to listen to
AM and FM radio. If you find that reception quality is
poor, an outdoor antenna should give you better sound
quality—see Connecting external antennas on page 28.
ANTENNA ANTENNA
- 3
FM UNBAL 75 FM UNBAL 75 AM LOOP AM LOOP
EO
S-VIDEO FRONT CENTER
SUBWOOFER
O1 VIDEO2 DVR1 DVR2
IN OUT IN OUT IN
FRONT CENTER
SUBWOOFER

AM loop antenna

1 Assemble the stand as shown in the illustration.
fig. A
fig. B
• Bend the stand in the direction indicated (fig. A).
• Clip the loop into the stand (fig. B).
• It's possible to fix the AM antenna to a wall (fig. C).
Before fixing, make sure that the reception is
satisfactory.
2 Pull off the protective shields of both AM antenna
wires.
3 Press the AM LOOP antenna terminal tabs to open
and insert one wire into each terminal.
4 Release the tabs to secure the AM antenna wires.
5 Place the AM antenna on a flat surface and point in
the direction giving the best reception.
Avoid placing near computers, television sets or other
electrical appliances and do not let it come into contact
with metal objects.
SC-LX81
AC IN
SURROUND SURROUND BACK
(Single)
L
PRE OUT
VOLTAGE
R
SELECTOR
MULTI CH IN
220 - 230 V
SURROUND SURROUND BACK
240 V
L
R
1
fig. C
03
27
En