Before First Use; Assembling The Paddle; Fitting The Bowl Roller Assembly - Breville Halo Instruction Booklet

before first use

Never immerse any part of the fryer body, power cord or plug in water or any
other liquid. Before assembling or disassembling your fryer, ensure it is unplugged
and all parts are cool.
Unpack the appliance and remove all packaging, promotional materials and stickers.
Remove all printed documents. Wash the removable bowl, paddle, measuring spoon, wire
rack and bowl handle in hot soapy water. Rinse then dry all of the parts. Wipe the body
and lid with a damp cloth only—see page 16 for cleaning instructions.

Assembling the paddle

1. Push the handle firmly into the hole in the paddle until it clicks. Once assembled, do
not try to remove the handle from the paddle otherwise it may be damaged.

Fitting the bowl roller assembly

The bowl roller assembly must be fitted the correct way up as shown in figure 1 below.
Two of the wheel axles are stamped with the word 'UP'. These must face upwards when
the roller is correctly fitted. If, during use, the bowl makes excessive noise or fails to
rotate properly, make sure that the bowl roller assembly is fitted the right way up.
1. Place the bowl roller assembly centrally into the bottom of your Halo Health Fryer.
2. Place the bowl into the body of your fryer as shown in figure 2 below.
q
UP
6
w