Focus/Zoom Tab - Adjusting The Focus/Zoom; Zm550/Zm551) - Sony Ipela SNC-CH115 User Manual

Preview screen
Preview the image and adjust the focus.
The current image focus position is superimposed when
adjusting the focus.
For the details on each button, refer to the Control bar of
the Plug-in free viewer (page 24).
Note
If you click the buttons in this tab, in order to adjust the
focus easily, the settings below are temporarily changed:
– Privacy Masking and Cropping are deactivated.
– The current image focus position is superimposed.
– The alarm of Motion detection is deactivated.
Adjusting the focus
Click Start button in Easy Focus to set the focus to the
optimum position.
Notes
• The most suitable focus position may not be available
depending on imaging conditions.
If so, click the –20, –5, –1, +1, +5 or +20 buttons to
adjust the focus accordingly.
• When SolidPTZ is set to On, Easy Focus may not
work properly. In this case, set SolidPTZ to Off.
Focus reset
Click the Reset button to return to the default flange
back position.
Focus/Zoom tab — Adjusting the
focus/zoom (SNC-CH160/CH260/
DH120/DH120T/DH160/DH220/
DH220T/DH260/EM520/EM521/

ZM550/ZM551)

Adjust the focus and zoom position by looking at the
image.
40
Setting the Camera Image — Camera Menu
Preview screen
Preview the image and adjust the focus/zoom.
The current image focus/zoom position is superimposed
when adjusting the focus/zoom.
For the details of each button, please refer to the Control
bar of the Plug-in free viewer (page 24).
Note
If you click the buttons in this tab, in order to adjust the
focus/zoom easily, the settings below are temporarily
changed:
– Privacy Masking and Cropping are deactivated.
– The current image focus/zoom position is
superimposed.
– The alarm of Motion detection is deactivated.
Adjusting the zoom
Click the –500, –100, –10, +10, +100 or +500 buttons to
adjust the zoom position accordingly.
Note
The focus is moved slightly after adjusting; adjust the
focus again, as necessary.
Adjusting the focus
Click Start button in Easy Focus to set the focus to the
optimum position.
Notes
• The most suitable focus may not be available
depending on imaging conditions. If so, click the –20,
–5, –1, +1, +5, +20 buttons to adjust the focus.
• When SolidPTZ is set to On, Easy Focus may not
work properly. In this case, set SolidPTZ to Off.