Setting The Camera Image - Camera Menu; Common Tab; Focus Tab - Adjusting The Focus (Snc-Ch120/Ch220); Focus/Zoom Tab - Adjusting The Focus/Zoom (Snc-Ch160/Ch260/Dh120/Dh120T/Dh160/ Dh220/Dh220T/Dh260) - Sony IPELA SNC-CH220 User Manual

Setting the Camera
Image
— Camera Menu
When you click Camera in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of the following tabs.
SNC-CH120/CH160/DH120/DH120T/DH160 do not
support the Privacy Masking function. A function that is
not installed will not be displayed.
SNC-CH120/CH220: Common, Focus, Picture,
Privacy Masking, Day/Night, Video codec, and
Streaming.
SNC-CH160/CH260/DH120/DH120T/DH160/
DH220/DH220T/DH260: Common, Focus/Zoom,
Picture, Privacy Masking, Day/Night, Video
codec, and Streaming.

Common Tab

Color
Select Color or Monochrome for the image.
OK/Cancel
See "Buttons common to every menu" on page 32.
Focus tab — Adjusting the Focus
(SNC-CH120/CH220)
Adjust the focus by moving the flange back position of
the imaging device.
Preview screen
Preview the image and adjust the focus.
The current image focus position is superimposed when
adjusting the focus.
For the details on each button, refer to the Control bar of
the Plug-in free viewer (page 24).
Note
If you click the buttons in this tab, in order to adjust the
focus easily, the settings below are temporarily changed:
– Privacy Masking and Cropping are deactivated.
(SNC-CH120/CH160/DH120/DH120T/DH160 do
not support the Privacy Masking function.)
– The current image focus position is superimposed.
– The alarm of Motion detection is deactivated.
Adjusting the focus
Click Start button in Easy Focus to set the focus to the
optimum position.
Notes
• The most suitable focus position may not be available
depending on imaging conditions.
If so, click the –20, –5, –1, +1, +5 or +20 buttons to
adjust the focus accordingly.
• When SolidPTZ is set to On, Easy Focus may not
work properly. In this case, set SolidPTZ to Off.
Focus reset
Click the Reset button to return to the default flange
back position.
Focus/Zoom tab — Adjusting the
focus/zoom (SNC-CH160/CH260/
DH120/DH120T/DH160/DH220/
DH220T/DH260)
Adjust the focus and zoom position by looking at the
image.
Setting the Camera Image — Camera Menu
39