Sony Ipela SNC-CH115 User Manual page 12

6
Click OK to complete the setting.
Restart Internet Explorer when the above procedure is
completed and access the camera.
Note
The model on sale in China does not support the SSL
function.
Configuring Windows Firewall
SNC toolbox may not operate correctly depending on
the configuration of Windows Firewall. (No cameras are
shown in the list even if they are detected.) In this case,
confirm the Windows Firewall configuration as follows:
Example: In the case of SNC toolbox
To turn Windows Firewall off
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
"User Account Control – Windows needs your
permission to continue" may appear. In this case,
click Continue.
4
Select Off in the General tab.
The cameras will be displayed in the list.
12
Assigning the IP Address to the Camera
To turn Windows Firewall on
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
If the message "User Account Control - Windows
needs your permission to continue" appears, click
Proceed.
4
Select Exceptions in the Windows Firewall dialog.
5
Click Add Program....
6
If the Add Program dialog appears, select SNC
toolbox and click OK.
SNC toolbox is added to the Program or port list.