Focus Tab - Adjusting The Focus; Focus / Zoom Tab - Adjusting The Focus/Zoom - Sony Ipela SNC-VB635 User Manual

Mercury lamp: Sets a white balance suitable for
photography under a mercury lamp.
Sodium vapour lamp: Sets a white balance suitable for
photography under a high-pressure sodium vapor
lamp.
Metal halide lamp: Sets a white balance suitable for
photography under a metal halide lamp.
White LED: Sets a white balance suitable for
photography under the light of white LEDs.
One push WB: The One push trigger button becomes
active. Click On to adjust the white balance instantly.
Manual: When this option is selected, R gain and B
gain become active. Selectable gain values are from
0 to 4095.
Picture
NR (XDNR)
Select the level to reduce image noise. When you select
Off, the NR function is not available.
Brightness
Set the brightness. Select high values to make the image
brighter, lower values to make the image darker.
Saturation
Set the saturation. Select high values to make the image
color stronger, lower values to make the image color
weaker.
Notes
Supported models: SNC-CX600W/CX600
• The image color may not change if the subject is in a
dark place.
• When the selected value is not 0, the image color may
change after the brightness is changed.
Sharpness
Set the sharpness. Select high values to make the image
edges sharper, lower values to make the image edges
smoother.
Contrast
Set the contrast. Select high values to make the image
contrast stronger, lower values to make the image
contrast softer.
Camera operating mode (SNC-XM637/
XM636/XM632/XM631/CX600W/CX600)
You can switch the operating modes of the camera.
Select either 25 fps or 30 fps.
The settings of the camera operating mode are related to
the frame rate selected in the Video codec tab.
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
OK/Cancel
See "Buttons common to every menu" on page 22.
Focus Tab — Adjusting the Focus
Supported models: SNC-VB635/VB630/VB600/
VB600B/EB630/EB600
Preview screen
Preview the image and adjust the focus.
Easy Focus
Adjust the focus position.
Click the Start button to adjust the focus position
automatically.
Focus
The most suitable focus position may not be available
depending on imaging conditions. If so, adjust the focus
position manually.
Note
Use Focus only when Easy Focus cannot be set to the
most suitable focus position.
Focus reset
Click the On button to return to the default flange back
position.
Focus / Zoom Tab — Adjusting the
focus/zoom
Display sample: SNC-VM630
Supported models: SNC-VB632D/VM630/VM600/
VM600B/VM631/VM601/VM601B/VM632R/
VM602R/EM630/EM600/EM631/EM601/EM632R/
EM602R/EB632R/EB602R
29