Preset Position Tab - Saving Pan/Tilt/Zoom Position - Sony SNC-WR600 User Manual

Enable
Select the checkbox to enable the auto flip function.
When you hold , or
make the direction of the camera pass through the point
where it faces the ground, the auto flip function is
activated, and the displayed picture is reversed.
When you deselect the checkbox, the direction of the
camera stops at the point where it faces the ground.
Latency
While Auto flip is set to On, set the time duration before
restarting tilt when the direction of the camera has tilted
completely downward.
Selectable values are 0 sec., 0.5 sec. are 0.75 sec.
Panorama mode
Select to rotate or not rotate the panorama image
displayed in the viewer in accordance with the pan
movement of the camera.
Rotate: The panorama image rotates as the camera
pans.
Fixed: The panorama image is fixed.
Zoom mode
Select the zoom mode.
Full: An image can be zoomed up to 30× optical zoom
and 12× digital zoom, 360× zoom in total.
Optical: An image can be zoomed up to 30× optical
zoom.
Focus mode
Select the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the
and
displayed in the main viewer.
Horizontal tilt limit
Limit the tilting of the camera so the tilt does not lean
over the horizontal position to the camera side.
When Horizontal tilt limit is set to On, the camera does
not lean past the horizontal position on the camera side.
Focus near limit
Set the range at which to automatically focus. If a
subject is nearer than the set range, it will not be
focused.
on the control panel to
,
buttons of the control panel
Preset position Tab — Saving pan/
tilt/zoom position
You can set up camera pan, tilt and zoom positions to
256 positions.
Preview screen
This screen is for monitoring images and setting preset.
Set
Click to save a selected position, such as pan, tilt or
zoom positions in the preset. If Home is selected, the
position you saved will be assigned as the home
position.
Call
Move to the pan, tilt and zoom positions saved in the
selected preset.
Reset
If you click this when Home is selected, the home
position will be reset to the factory setting.
Add
Save the current pan, tilt and zoom positions as a new
preset.
Remove
Delete the selected preset.
Rename
Change the name of a selected preset.
Thumbnail
Check this checkbox to registers a thumbnail.
Select a radio button to determine whether to register the
current camera image as a thumbnail or to register with
a specified image.
To specify an image, click Browse.
Setting the PTZF control — PTZF control Menu
49