Installation
Adjusting varifocal lens zoom and focus
1) Unlock the zoom (focus) handle by turning anti-clockwise.
2) A djust the zoom (focus) by moving the handle to WIDE (NEAR) or TELE (FAR).
3) A fter adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted
position does not change.
Connection
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the monitor.
• T he connection method varies depending on the type of monitor and accessories. Please
refer to the user's manual for each instrument.
• P lease turn off the power when connecting.
• P lease select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select
75Ω for the Intermediate device as shown in the picture below.
Monitor
CCTV Camera
CCTV Camera
COLOR DOME CAMERA
Focus Handle
Zoom Handle
Intermediate End monitor
12
User Guide
Connecting to Power
The recommended adaptor specification for
SIR-4260V is DC 12V/4A.
Please check the standard power requirement
before connecting the power.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG)
#24(0.22㎟)
#22(0.33㎟)
0.078
Resistance value(Ω/m)
Voltage drop(V/m)
0.028
• T herefore having an excessively long distance between the power adaptor and the
camera may affect the camera's performance.
※ Standard voltage for camera operation : DC 12V±10%, AC 24V±10%
※ ... T here may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
※ The set for America does not include the power adapter.
Notes
• Please use a power adapter that meets the required standards.
• Please connect the power after installation.
COLOR DOME CAMERA
#20(0.52㎟)
#18(0.83㎟)
0.050
0.030
0.018
0.018
0.011
0.006
13
User Guide