Genie GTH-636 Service Manual page 106

Section 4 • Repair Procedures
OPERATOR'S COMPARTMENT
How to Remove the Brake
Actuator Pedal
GTH-644, GTH-842 and GTH-844:
1 Locate and open the battery access door.
2 Disconnect the battery from the machine.
Electrocution hazard. Contact with
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
3 Remove the fasteners securing the pedal
assembly to the floor.
4 Carefully lift the pedal assembly and place in a
secure position, to allow access to the
underside of the brake pedal.
5 Tag and disconnect the wires at the clutch
cut-off switch and the brake pressure switch.
6 Tag, disconnect and plug the hoses at ports
and of the brake pedal actuator body. Cap
P T
the fittings.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
Burn hazard. Contact with hot
fluids or components may cause
severe burns.
7 Remove the fasteners securing the brake
actuator pedal in place. Remove the brake
actuator pedal.
4 - 36 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
GTH-632, GTH-1048 and GTH-1056:
1 Locate and open the battery access door.
2 Disconnect the battery from the machine.
3 Remove the fasteners securing the brake
actuator covers in place. Set the covers to the
side.
4 Tag, disconnect and plug the hoses from ports
A, P and T of the brake actuator. Cap the
fittings.
F,
5 Remove the fasteners securing the brake
actuator pedal in place. Remove the brake
actuator pedal.
Electrocution hazard. Contact with
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
Burn hazard. Contact with hot
fluids or components may cause
severe burns.
Part No. 97487
June 2007
REV B