Fuel And Hydraulic Tanks; Fuel Tank - Genie GTH-636 Service Manual

Section 4 • Repair Procedures

Fuel and Hydraulic Tanks

3-1

Fuel Tank

How to Remove the Fuel Tank
Explosion and fire hazard. Engine
fuels are combustible. Remove the
fuel tank in an open, well-
ventilated area away from heaters,
sparks, flames and lighted
tobacco. Always have an
approved fire extinguisher within
easy reach.
Explosion and fire hazard. Never
drain or store fuel in an open
container due to the possibility of
fire.
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
1 Disconnect the battery from the machine.
Electrocution hazard. Contact with
electrically charged circuits could
result in death or serious injury.
Remove all rings, watches and
other jewelry.
2 Remove the engine air filter assembly from the
machine.
3 Remove the front portion of the engine
enclosure assembly from the machine.
4 Remove the fuel filler cap from the tank.
4 - 38 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
5 Using an approved hand-operated pump, drain
the fuel tank into a container of suitable
capacity. Refer to Section 2, Specifications .
Explosion and fire hazard. When
transferring fuel, connect a
grounding wire between the
machine and pump or container.
Note: Be sure to only use a hand operated pump
suitable for use with gasoline and/or diesel fuel.
6 Tag, disconnect and plug the fuel supply hose.
7 Remove the fuel tank hold-down strap retaining
fasteners. Remove the straps from the fuel
tank.
8 Support and secure the fuel tank to an
appropriate lifting device.
9 Remove the fuel tank from the machine.
Component damage hazard. The
fuel tank is plastic and may
become damaged if allowed to fall.
Note: Clean the fuel tank and inspect
for cracks and other damage before installing.
June 2007
REV C
Part No. 97487