June 2007
REV C
7-2
Tilt Limiter Manifold Components
The tilt limiter manifold is located on the front of the hydraulic tank at the tailpipe side of the machine.
Index
No.
Description
1
Relief valve, 1250 psi / 86.2 bar ....... BA .......... Fork level circuit ................................ 30-35 ft-lbs / 45-50 Nm
1
Note: 'alpha' callouts refer
to corresponding notes on
the hydraulic schematic
Part No. 97487
GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Schematic
Item
Function
BA
Section 4 • Repair Procedures
MANIFOLDS
Torque
4 - 49