Perform Axle Maintenance; Perform Transmission Maintenance - Genie GTH-636 Service Manual

June 2007
REV B
C-3

Perform Axle Maintenance

Note: Axle specifications require that this
procedure be performed after 500 hours of
operation.
GTH-636, GTH-644, GTH-842 and GTH-844:
Required maintenance procedures and additional
axle information is available in the
Dana 212 Axle Maintenance and Repair Manual
(Dana part number 0247).
Dana 212 Axle Maintenance and Repair Manual
Genie part number
GTH-1048 and GTH-1056:
Required maintenance procedures and additional
axle information is available in the
Dana 213 Axle Maintenance and Repair Manual
(Dana part number 0243).
Dana 213 Axle Maintenance and Repair Manual
Genie part number
Part No. 97487 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Section 3 • Scheduled Maintenance Procedures
C-4
Perform Transmission
Maintenance
GTH-1048 and GTH-1056
Note: Transmission specifications require that this
procedure be performed every 500 hours or semi-
annually, whichever comes first.
Required maintenance procedures and additional
transmission information is available in the
Dana T20000 Maintenance Manual
(Dana part number 0202).
97488
Dana T20000 Maintenance Manual
Genie part number
115026
CHECKLIST C PROCEDURES
115025
3 - 25