Maintenance Inspection Report - Genie GTH-636 Service Manual

June 2007
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
· Make copies of this report to use for
each inspection.
· Select the appropriate checklist(s) for
the type of inspection to be
performed.
Daily or 8 hour
Inspection:
Quarterly or 250 hour
Inspection:
Semi-annually or 500 hour
Inspection:
Annually or 1000 hour
Inspection:
2 Year or 2000 hour
Inspection: A+B+C+D+E
· Place a check in the appropriate box
after each inspection procedure is
completed.
· Use the step-by-step procedures in
this section to learn how to perform
these inspections.
· If any inspection receives an "N", tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Part No. 97487 GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056

Maintenance Inspection Report

Checklist A - Rev C
A-1 Manuals and decals
A-2 Pre-operation inspect
A-3 Function tests
A-4 Lubricate machine
A-5 Engine maintenance -
JDeere/Perkins models
A-6 Transmission
maintenance
A-7 Engine maintenance -
Deutz models
Perform after 40 hours:
A-8 30 day service
Perform after 50 hours:
A-9 Transmission
maintenance
Perform every 50 hours:
A-10 Engine maintenance -
Perkins models
A-11 Axle maintenance
Perform after 100 hours:
A-12 Engine maintenance -
John Deere models
A
A-13 Axle maintenance
A-14 Transmission
A+B
maintenance
A+B+C Perform every 200 hours:
A-15 Axle maintenance
A+B+C+D
Comments
Section 3 • Scheduled Maintenance Procedures
Checklist B - Rev B
Y N R
B-1 Battery
B-2 Electrical wiring
B-3 Exhaust system
B-4 Engine air filter
B-5 Tires and wheels
B-6 Hydraulic oil
B-7 Tank venting systems
B-8 Boom wear pads
B-9 Lubricate driveshafts
B-10 Engine maintenance -
John Deere models
Checklist C - Rev B
C-1 Engine maintenance -
Deutz models
C-2 Engine maintenance -
John Deere models
C-3 Axle maintenance
C-4 Transmission
maintenance
C-5 Engine maintenance -
Perkins models
Perform every 700 hours:
C-6 Axle maintenance
Perform every 800 hours:
C-7 Axle maintenance
Y N R
Y N R
3 - 5