Section 4 • Repair Procedures
MANIFOLDS
7-7
Fork Tilt Manifolds Components
The fork tilt manifolds, used only on machines with single joystick, are located on the front of the hydraulic
tank at the cab side of the machine.
Index
No.
Description
—
Coil nut (items GA and GB) ................................................................................................... 40 in-lbs / 4.5 Nm
1
Solenoid valve, 2 position 4 way ..... GA .......... Tilts lifting forks down ................................. 20 ft-lbs / 27 Nm
2
Solenoid valve, 2 position 4 way ..... GB .......... Tilts lifting forks up ...................................... 20 ft-lbs / 27 Nm
GA
Y72A
1
Note: 'alpha' callouts refer
to corresponding notes on
the hydraulic schematic;
alphanumeric callouts refer
to the electrical schematic
4 - 54
GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Schematic
Item
Function
June 2007
Torque
GB
Y72B
Part No. 97487
REV C
2