June 2007
REV C
7-12
Fork Rotate Manifold Components (option)
If equipped with the fork rotate option, the fork rotate manifold is located under the rear lock-up manifold
on the rear axle support bulkhead at the cab side of the machine.
Index
No.
Description
1
Solenoid valve, 3 position 4 way
with manual override ........................ LA .......... Rotate forks clockwise or
Coil nut .................................................................................................................................. 30 in-lbs / 3.4 Nm
1
Note: 'alpha' callouts refer
to corresponding notes on
the hydraulic schematic
Part No. 97487
GTH-636 • GTH-644 • GTH-842 • GTH-844 • GTH-1048 • GTH-1056
Schematic
Item
Function
counterclockwise
LA
Section 4 • Repair Procedures
MANIFOLDS
Torque
4 - 59