Operating Instructions
Reset to Factory Default
Reset to Factory Default window initialises all the parameters including the ID,
Password, IP address and Subnet Mask except Date and Time setting to the
factory default. Please reconfirm before doing the Reset to Factory Default
operation.
1.
Click [Reset to Factory Default] on Setup Page.
2.
Click [Execute].
•
Click [Cancel] to quit. It returns to the Setup Page.
Notes
•
Do not turn off the power during the Reset to Factory Default. It may
interrupt the Network Camera operation.
•
IP address and Subnet Mask should be set newly after Resetting to
Factory Default.
•
CLEAR SETTING button can also reset the Network Camera to the
Factory Default. Please refer to 5.1 Network Camera reset
procedure—default settings.
•
Internal clock will not be erased, however time mode will return to AM/
PM mode and Auto adjustment will be disabled.
•
If Reset to Factory Default is used, all user settings will be lost. You will
have to reconfigure the entire Network Camera.
86