Factory Default Reset Button - Panasonic BL-C10A Operating Instructions Manual

3.3

FACTORY DEFAULT RESET Button

The camera has a FACTORY DEFAULT RESET button on the bottom.
1.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
• Press the FACTORY DEFAULT RESET button for 1 second when the camera
is on.
• The indicator blinks orange, and then turns off for 10 seconds.
• Do not turn off the camera until the indicator lights green.
Notes
• The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 35). Set it again.
• See page 82—page 87 for default settings.
• All buffered images are deleted when resetting the camera to factory
default.
• The reset operation takes about 1 minute.
Remove the
cable cover.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
2. Press the button
with a pointed
object.
81