Switching On - Miele KM 3034 Operating And Installation Instructions

Switching on

While the gas cooktop is in operation, it must be used in
conjunction with either a rangehood or another domestic
ventilation system.
^ To ignite the burner, press the control knob down and turn
it anti-clockwise to the largest flame symbol. The ignitor will
make a clicking sound and ignite the gas.
When a control knob is activated, a spark is generated on
all burners. This is not a fault.
^ If the burner does not ignite, turn the control to off "ß". Air
the room or wait at least one minute before trying again.
^ If the burner does not ignite after a second attempt, turn
the control back to "ß" and go to the "Problem solving
guide" for advice.
When switching on, re-ignition sometimes occurs (1-2 clicks)
if the flame on the ignition safety device has gone out briefly,
or if the thermal element is not hot enough, e.g. following a
gust of air.
Operation
21