Using A Web Browser; Activex Installation (Axumf.cab) - Ganz IP Camera User Manual

2. USING A WEB BROWSER

After the network and power connection are established, access the web browser to view the
live streaming of the connected device. Installation of the ActiveX is required to see the live
page and access full controls in Microsoft® Internet Explorer.

2.1. ActiveX Installation (AxUMF.cab)

For full control of a device through a web browser, installation of the ActiveX control is
required. Refer to the following steps to install the ActiveX. Disable the Pop-up blocker or run
"Add-on" notice in a browser to install the ActiveX and Installation file.
1. Click the installation warning message on the view page as below. Jpeg snapshot is
displayed every 1 second before you install AxUMF.cab
2. Click the Install button on the warning message box. If the page is not responding after
the installation, refresh the page.
3. Install the setup.exe file by clicking the link shown on the main page. Jpeg snapshot is
displayed every 1 second before you install setup.exe.
7