System Set-Up - Kenwood TK-860G Service Manual

TK-860/G ( N
Merchandise received
Choose the type of transceiver
Transceiver programming (Option)
Are you using the public address?
Are you using the KGP-1A Modem GPS receiver
or the KGP-1B Modem GPS controller?
Are you using the external speaker?
Are you using ignition sense cable?
Delivery
4
) /862G/ ( N )

SYSTEM SET-UP

See page 12.
A personal computer (IBM PC or compatible), programming interface (KPG-22),
and programming software (KPG-67D) are required for programming.
(The frequency and signalling (option) data are programmed for the transceiver.)
YES
NO
YES
NO
YES
NO
YES
NO
Frequency range (MHz)
128ch models
TK-860G
440~470
Frequency range (MHz)
8ch models
TK-862G
440~470
See page 23.
KAP-1
Installation the TX-RX unit when used KAP-1.
PA/HA unit
(Option)
*
See the KCT-20 instruction manual
KCT-20
(B62-0733-11).
Connection cable
(Option)
See page 26.
KES-3
External speaker
(Option)
See page 21.
*
KCT-19
Accessory connector cable
(Option)
: You can install either KCT-19 or KCT-20 to the
*
TK-860G/862G transceiver
RF power Type
25W E,NE
RF power Type
25W E,NE
See page 22.
KCT-18
Ignition sense cable
(Option)