Operating Features - Kenwood TK-860G Service Manual

TK-860/G ( N
1-5. Rear panel
Power input
connector
External
speaker jack
1-6. Programmable Auxiliary Functions
The following keys can be programmed with the func-
tions listed below.
TK-860G : / (left side),
, , and SCN.
TK-862G : / (left side),
A.
Function
AUX
Call 1
Call 2
Channel Down
Channel Up
Display Character (TK-860G only)
Group Down
Group Up
Home Channel
Horn Alert
Key Lock
Monitor
Monitor Momentary
None (No function)
Public Address
Redial
Scan (TK-860G only)
Scan Del/Add (TK-860G only)
Selcall Entry
Squelch Momentary
Squelch Off
Talk-Around
Volume Up
Volume Down
2-Tone Encode*
* : The code for the TK-862G transceiver is not selectable. You
can transmit only one 2-Tone code, which is pre-programmed in
the transceiver.
The Emergency function can also be programmed. However, it
can only be used with a foot switch.
6
) /862G/ ( N )

OPERATING FEATURES

Antenna
connector
/ (right side), MON, A, D/A,
/ (right side), MON, , , and
DTMF/2-Tone 5-Tone
Yes Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
YeS Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
2. Operation Features
The TK-860G/862G is a UHF FM radio designed to oper-
ate in conventional format. The programmable features are
summarized.
3. Transceiver Controls and Indicators
3-1. Front Panel Controls
All the keys on the front panel are momentary-type push
buttons. The functions of these keys are explained below.
• POWER key
Transceiver POWER key. When the power is switched
off, all the parameters are stored in memory. When the
power is switched on again, the transceiver returns to the
previous conditions.
• CHANNEL UP/DOWN key (Programmable)
• / key (Programmable) : TK-860G only
• SCAN key (Programmable) : TK-860G only
• MONITOR key (Programmable)
• A, D/A key (Programmable) : TK-860G only
• , , A key (Programmable) : TK-862G only
• VOLUME UP/DOWN key (Programmable)
• BUSY/TX LED
The BUSY indicator (Green LED) shows that the channel
is in use. The TX indicator (Red LED) shows that you are
transmitting.
3-2. Programmable Keys
The FPU (KPG-67D) enables programmable keys to se-
lect the following functions.
AUX, Channel down, Channel up, Display character *
Emergency (Only foot key), Group down *
Home channel, Horn alert, Key lock, Squelch Momentary,
Squelch Off, Monitor Momentary, Monitor, Public address,
Redial, Scan * 1 , Scan del/add *
Volume up, 2-tone encode and None.
These functions the FPU programs to the function keys
and described in the following sections.
*1 : TK-860G only.
• AUX
If this key is pressed, "AUX" icon lights on the display
and AUX port which is inside of the transceiver turns to the
high level. If pressed again, the "AUX" icon goes off and
the AUX ports turns to the lower level.
• Channel up/down
When the key is pressed each time, the channel number
to be selected is incremented/decremented and repeats if
held for one second or longer.
1
1 , Group up * 1
1 , Talk around, Volume down,
,
,