BLADEZ PB-SM 816-S Product Handbook page 7

Place the handlebar onto the billet stem with the hole
facing down towards the threaded bolt as shown with
arrow in (Fig. 2).
Place the billet stem cap on top of the handlebar and
tighten the bolts to secure the handlebar onto the stem as
shown in (Fig. 3).
Unfolding Instructions
1. To unfold the XTR-SE, begin by pressing
down on the FOLDING HANDLE with one
hand while gently pulling up on the handlebar
with the other hand.
2. Fully extend the handlebars to their upright
position until you feel the mechanism lock into
place (Fig. 4).
Quick Release Deck
The XTR-SE comes equipped with a quick release
deck which gives you easy access to the batteries
and the pc board. To open, pull the deck up from
the rear of the scooter and it will open towards the
handlebars (Fig. 5).
Bladez Corp. • 20155 Ellipse • Foothill Ranch, CA 92610 • (866) 325-2339 • www.ebladez.com
Page 6