Table of Contents
Advertisement
Install front cover to icemaker.
Front cover installation – undercounter
CAUTION
• Keep ventilation openings in the appliance enclosure
clear of obstruction. Failure to do so could result in
damage to equipment.
• To ensure proper ventilation (if not using supplied grille)
carefully review air circulation specifi cations in section
4.1
• Remove and discard plastic grille
• Apply supplied gasket material on fl at
surface of stainless steel portion of front
panel to prevent air recirculation
• Attach supplied metal grille to opening in
counter door (see section 4.1)
Icemaker MUST be sanitized prior to operation!
Consult Operation and Service Manual provided with icemaker for sanitizing instructions.
Upon startup, the icemaker will enter a 15-minute time delay to allow the compressor to equalize and the
evaporator to thaw. If this is the initial start-up, the control board's reset button can be pressed to start the machine
immediately.
HARMONY • RIDE Technology
➊
➋
➌
NOTICE
self-contained
Normal front cover installation
• Slide icemaker cover over machine,
ensuring that tabs on back of cover
slip under louvers on back of louvered
➊,
docking assembly
screws through cover
• Place louvered front cover on machine
8
Front cover
then tighten two
➋
19
Advertisement
Table of Contents
