Table of Contents
Advertisement
Undercounter installation detail – Horizon 700 series (continued)
Horizon ice machines can be installed undercounter/in-cabinet to fi ll bins or dispensers using RIDE technology. Care must
be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine out-
ages.
exhaust
cabinet door
supplied air
intake grille
1. The supplied exhaust grille must be located at least
18" (46 cm) from the supplied air intake grille (exhaust air must
not recirculate with intake air).
2. Cabinet interior must be open to allow for unrestricted exhaust
air fl ow.
3. Ice transport tube needs minimum 1/4" per foot (2 cm per
meter) pitch toward ice machine and should be secured to
prevent dips and traps from forming.
HARMONY • RIDE Technology
supplied
grilles
Horizon
ice machine
18" (46 cm)
min.
24.5"
(62 cm)
min.
22.25"
(57 cm)
min.
air in
cabinet door
must mate directly
to air intake gasket
door & gasket
must mate
directly
locating
cutout
2"
(50 mm)
cutout for supplied air intake grille
18"W x 14"H (46 cm x 36 cm)
self-contained
electric
water
drain
12" (30 cm) minimum
between icemaker
and dispenser
Horizon ice machine
completed installation with
gasket and door in place –
side view
2"
Front
(50 mm)
cutout
bottom of
ice machine
side of
ice machine
4. Cabinet door must mate directly to air intake
gasket.
5. Cabinet interior must provide a minimum clear
space of
24.5" deep (62 cm) by 22.25" high (57 cm).
6. Cutout for supplied grilles must meet minimum size
requirements shown above.
7 . Utilities should be conveniently located as shown.
ice transport tube
minimum 1/4" per foot
(2 cm per meter)
pitch toward icemaker
secure to prevent dips
and traps from forming
see dispenser
specification
sheet for
installation
requirements
24.5" (62 cm) min.
22.25"
(57 cm)
minimum
13
Advertisement
Table of Contents
