Mitsubishi Electric FR-E5NC Instruction Manual page 33

Device
Signal
No.
RY10
RY11
RY12
RY13
RY14
Reserved (Note 5)
RY15
RY16
RY17
RY18
RY19
RY1A Error reset request flag
Note: 3. While the set frequency designation (RYD) is on, the set frequency (RW
4. If these commands are switched on simultaneously, only one of these is executed.
5. The reserved input signal should be off. (Enter 0)
Reserved for the system.
If the error reset request flag (RY1A) is switched on only when an inverter fault occurs,
the inverter is reset and the error status flag (RX1A) switches off.
25
COMMUNICATION SPECIFICATIONS
Description
) value is always returned.
W1