N-Tron 600 Series Installation Manual page 9

CONNECTING THE STANDARD RING
Remove the dust cap from the fiber optic connectors and connect the
fiber optic cables.
Please refer to the Figure 1. Diagram.
To begin the ring, the TX out-port #7 should be connected to the RX
in-port #8 of the far end station.
connected to the TX out-port #8 on the far end station.
Likewise, the TX out-port #8 should be connected to the RX in-port #7
of the far end station completing the ring. The RX in-port #8 should be
connected to the TX out-port #7 on the far end station.
FIBER OPTIC PAIR
#8
608M FX #7
FIBER OPTIC PAIR
CAT5 CAT5
PLC PC
LAPTOP
(UP TO 6 COPPER PORTS CONNECTED TO EACH 608MFX)
12/15/05
The RX in-port #7 should be
PC PC PC
MMI MMI MMI
CAT5
CAT5
CAT5
608MFX
#7
RING
MANAGER
#8
#7
608M FX
CAT5 CAT5
Additional N-TRON PLC
405TX
Ports
608MFX RING TOPOLOGY
Figure 1
(UP TO 6 COPPER PORTS CONNECTED TO 608MFX)
CAT5 TO MES
#8
#8
FIBER OPTIC PAIR 608M FX
CAT5
PLC
#7
CAT5
DRIVE
9