Camera Mounting Procedures; Connection/Installation - JVC VN-V686U Startup Manual

Alarm
VN-V686U comes with a motion detection feature
and dual alarm input.
By motion detection or alarm input, actions such as
mail delivery, message transmission via TCP/UDP,
alarm output, turning to preset position, changing
B&W mode can be triggered. These actions can
also be triggered by combination of two alarm
inputs.
Installing an FTP server enables uploading of
JPEG images before and after the alarm input time
(pre-/post-recording) to the server.
VN-V686U
Network
Sending JPEG images
before and after alarm
input to FTP
Restrictions on Clients
VN-V686U enables users to authorize or reject
the acquisition of images by specific IP address.
Control via customized application
software
The following uses are also possible by developing
a customized application software that supports the
API of VN-V686U.
For details, please refer to [API GUIDE] in the
supplied CD-ROM.
● Monitors via the computer while at the same
time records images to the HDD of the
computer.
● Performs recording by changing the frame
size/frame rate during alarm occurrence.
● Records the type and time of alarm
occurrence on the computer.
T For detailed usage of VN-V686U, please
refer to [INSTRUCTIONS](pdf) in the
supplied CD-ROM.
Alarm Device
Computer
Camera Mounting
Procedures
Mount the camera using the following procedures.
Step 1 Connection/Installation
(A Page 16)
\
Preparation (A Page 16)
Mounting the ceiling clamping bracket (A
Page 18)
Mounting the camera (A Page 18)
G
\
Step 2 Network settings (A Page 26)
Configure the network settings of the computer
and this camera.
T In a system where multiple units of VN-
V686U are used, turn on the power of only
one unit to configure the IP address settings
using the Internet Explorer. Upon doing so,
turn on the power of the second unit and
configure accordingly. Configure the settings
for the other cameras using the same
procedure.
G
Step 3 Configuring settings using the
Internet Explorer
Configure the picture quality and alarm settings
using the Internet Explorer.
T For detailed usage of VN-V686U, please
refer to [INSTRUCTIONS](pdf) in the
supplied CD-ROM.
G
Step 4 Operating the built-in viewer
(A Page 32)
The built-in viewers enable you to monitor JPEG
and MPEG4 images and save JPEG images.