JVC TK-C686E Installation Manual page 33

Item
ALARM INPUT.. (continued)
● 5s
TIME
● ALARM
PRIORITY
ALARM OUTPUT..
● OFF
OUTPUT1
OUTPUT2
Setting value
This item sets the alarm signal output time and alarm title display time that are
6s
output when there is an alarm.
7s
Memo
8s
● When [ALARM INPUT] item is AOFFB or [B&W MODE] (A Page 35), and
9s
AALARM IN1 to 6B is set, A- - -B will be displayed and settings is disabled.
10s
15s Note
● This setting is invalid in a RM-P2580 system. Set in the [ALARM TIME] item
20s
30s of RM-P2580. (A RM-P2580 Instruction Manual)
60s
This item sets the operation for alarm input when the camera is operated
MANUAL
manually.
ALARM :Alarm activates when there is an alarm input regardless of whether
MANUAL :Alarm does not activate even if there is an alarm input during manual
Memo
● When [ALARM INPUT] item is set to AOFFB, A- - -B will be displayed and
settings is disabled.
● This setting is invalid in a RM-P2580 system. AALARMB mode will take over.
This item sets the alarm output terminal.
OFF
ALARM
ALARM :When there is an alarm input, alarm signals will be output and will
B&W
PRESET
Memo
AUX1
● Alarm signals will also be output when there is an alarm input in the system
AUX2
control unit or RM-P2580.
AUX3
B&W
PRESET :Alarm signals are output when the camera is moved to the home
AUX1,AUX2,AUX3
Memo
● In normal cases, do not use AAUX1B, AAUX2B, AAUX3B. For details, please
consult your nearest JVC dealer.
Functions and settings
the camera is in manual operation or not. (Alarm operation has
priority)
operation. (Manual operation has priority)
:Alarm does not output.
continue during alarm display.
:When this unit is in B&W mode, alarm signals will be output and will
continue throughout the B&W mode.
position or to a preset position.
:Alarm signals are output when there is an auxiliary input.
33