Camera Installation; Disassembling The Camera - JVC VN-T216U Instructions Manual

Disclaimer

We will not be responsible for any inconveniences or disturbances caused in the event of privacy invasion as
a result of camera footages of this product.
Others

Because the camera controls auto exposure by shutter speed, flicker can be shown by fluorescent light. To
reduce the flicker, please select PAL mode if the power is 50Hz, or NTSC mode if the power is 60Hz. (Refer
to INSTRUCTIONS "4 Overview of Navigation and Controls" - "Video Type").

Camera Installation

Disassembling the Camera

All the installation and operations here should conform to your
Note
local electricity safety rules.

Remove the inner liner (3) by pulling it free of the two notches (2) in the
housing.

Set the camera housing (5) and liner (3) aside.
11