Printer Specifications; Electrical Specifications; Power Sources And Consumption; Power On/Off - Xerox DocuPrint P8e Service Manual

2.1 Electrical Specifications

Video Controller (Video I/F)
Video Controller Board (Video I/F) is installed in the printer.
Video Interface Specification to be provided, if necessary.

2.1.1 Power Sources and Consumption

The Xerox P8e printers are available in either a 110 or a 220 volt configuration.
Line Line Voltage
Voltage Tolerance
100/115 VAC 90 - 132 VAC
220/240 VAC 198 - 264 VAC

2.1.2 Power On/Off

The Xerox P8e printers have an on/off power switch located on left rear corner of machine. The machine
is equipped with a grounded power socket. Printer will power down automatically when not used for a
period of time (see Power Saver).

2.1.3 Power Saver

The Power Saver reduces power automatically when the printer does not receive data for a period of
time. Power Saver is a menu selection in the Remote Control Panel (RCP) software which provides the
user with the ability to control, when the printer enters the power saver state. The default value is 30
minutes. In Power Save mode, the power consumption is under 25 watts.

2.1.4 Mechanical

Unit
Metric
SAE

2.1.5 Consumables

PRINTER CARTRIDGE: 5000 pages at 5% coverage; more with use of the toner saving Econo Mode.
The starter kit cartridge shipped with the printer is 2.5 K pages with 5% coverage.

Printer Specifications

Frequency Frequency
Tolerance
60 Hz 57 - 63 Hz
50 Hz 47 - 53 Hz
Width Depth
345 mm 364.9 mm
13.58 in. 14.36 in.
7/98
2-2
Running Power
Consumption
450 Watts
450 Watts
Height Weight
224 mm 7.5 Kg
8.8 in 15.4 lbs
Xerox DocuPrint P8e Service Manual
Power
Saver
25 Watts
25 Watts